Hello! Welcome to the official website of Dashiqiao Dingwang!

111.jpg   meig.jpg

sitemap | RSS | XML
通用banner
Your current location: Home > News > Industry news

Contact us

Dashiqiao Dingwang Packing Products Co., Ltd.

Contact number: 15904172221 15134206381 13841758121

Tel: 0417-5281979

Mail Box: 499497158@qq.com

Address: Xijiang Village, Economic Development Zone, Yinglou South Building

Website:en.dsqdw.com 

Website: www.dsqdw.com


The four main points of the design of the container manufacturer

2019-08-28

The four main points of the design of the container manufacturer:


safety




Mainly refers to the strength of the container. The packaging volume, the weight of the load and the number of packaging units should be considered in the design. Also consider the distance of the transportation distance and the number of transportation times, and what kind of transportation and transportation methods should be used. In the GB/T10454-2000 container bag national standard, the technical requirements for the base bag and sling of the container bag are strictly defined. From the safety point of view, it is clear that the structure of the container bag is all the bottom hanging structure. The safety factor must be 1.6.


Custody




According to the user's conditions of use, the material should be reasonably selected and the ratio should be reasonable. The anti-aging ability of plastic products under the sun exposure is currently a concern, and it is also a problem often encountered in the actual use of container bags. Pay attention to the use of anti-purple agents and the choice of materials during the production process.

1565594117194550.jpg

Sealing




Different packaging materials, different sealing requirements. For example, powder or toxic materials and materials that are afraid of being contaminated have strict requirements on sealing performance, and materials that are easily damp or mildew have special requirements for air tightness. Therefore, when designing the container bag, pay attention to the influence of the base film coating process and the sewing process on the sealing property.


Usability




When designing a container bag, it is necessary to fully consider the specific methods and methods used by the customer to use the container bag, such as lifting, transportation, loading material performance, etc. Also consider whether it is food packaging, and consider being non-toxic and harmless to the packaged food.


label

Previous:no

Recently Viewed:

Related Products

related news